Pages

20 October 2013

Simple Rubber Band Gun and Ammo Pouch


I made these simple wooden rubber band guns with Mr 6 today. It was declared to be "epic" so many times I thought I'd share. I made a second one when Miss 4 came home, and the whole process (including "helping" took about 10 minutes)

Ingredients:
26mm diameter dowel stick. 7cm long*
1cm square stick. 18.5cm long*
1 wooden peg
2 nails
*note: all the measurements are approximate, done by eye, and measured later. We used scraps we had handy.

You also need:
wood glue
sandpaper
hand saw
hot melt glue

1. Sand all edges
2. Saw a small groove horizontally across the end of the square stick (for the rubber band to sit in)
3. Wood glue and nail the other end of the square stick to the round dowel.
4. Hot glue gun the peg to the top of the square stick
5. Test it out and paint it.

For the target, we made holes in the side of a cubby house box, and I taped plastic bags to the back of the holes to catch the rubber bands. It made it easier to see which hole the rubber band had gone through, and easier to get it back.

I also made an "ammo pouch", which consisted of a simple rectangle of fabric sewn into a tiny bag (sew sides and a triangle across the bottom corners). I sewed a pipe cleaner in the top hem, which gives it a stiff feel, so the pouch can be pinched shut or kept open.


Good quiet fun that's not going to actually injure someone when the rubber band hits (unlike the wooden sword which was Mr 5's first suggestion for a wood work project). And all done before the kids lost interest. Definitely a great thing to make on a quiet or rainy day.



No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...